Seekins Precision rings are built to withstand the demands of serious shooters without the extra weight of steel. The popular Slimline clamping system uses two of the same grade 8 Torx™ screws to tighten the side clamp onto the picatinny rail. The slimline clamping system gives the shooter a slim, snag free setup that easily slips in or out of a scabbard, drag bag, or Eberlestock pack system. Guaranteed for life!
SP Ring specs
Material: Billet 7075-T6 Aluminum alloy
Screws: Grade 8 T-25 Torx™ 8-32x1/2
Coating: Milstd Type III Black hard anodize
Width:
.65” wide - 1”scope tube rings only
.8” wide- 4 cap screws,
1.00” wide- 6 cap screws
Torque spec:
Cap screws 15-25 INCH lbs.
Clamp screws 55 INCH lbs.
Price:
1" rings – $119.99
30mm
4 screw $129.99
34 and 35mm
4 screw $149.99
Ring height is measured from the top of the rail to centerline of scope tube
| Tube Diameter |
Low |
Medium |
Med high |
High |
| *1 inch |
0.75" |
n/a |
n/a |
n/a |
| 30mm |
0.82" |
0.87" |
0.92" |
0.97" |
| 34mm |
0.92" |
n/a |
n/a |
0.97" |
| 35mm |
0.95" |
n/a |
n/a |
1.00" |
|
Hosted by TwitchHosting.com
